Whole-Home Repipe, Without the Horror Stories

What a Repipe Replaces

A whole-home repipe replaces every hot and cold water supply line in the house — from the point where water enters your home to every fixture: sinks, showers, tubs, toilets, laundry, water heater, and outdoor hose connections. Drain lines are a separate system and usually aren't part of the job. When we're done, none of the original failing supply pipe is left in service; that's the point. Replacing one bad section of a corroded system just schedules the next leak.

Why PEX Is What Goes In

We repipe with PEX — cross-linked polyethylene, the material that has become the standard for repipes across the desert Southwest, for reasons that map exactly onto why pipes fail here:

• It doesn't corrode. Hard, chlorinated water — the thing that kills copper and polybutylene in Henderson — doesn't attack PEX. No scale-driven pitting, no pinholes.
• It flexes. Desert soils move and slab houses move with them. PEX tolerates movement and vibration that stresses rigid pipe and its joints.
• Fewer joints in the walls. PEX runs are pulled as continuous lines, so there are dramatically fewer fittings hidden in walls and attics — and joints are where pipes leak.
• Quieter plumbing. PEX absorbs the water-hammer bang that rigid pipe telegraphs through a house.

The Job, Day by Day

The reason your water stays on during most of a repipe is sequencing: the new system goes in alongside the old one first. We map the fixture runs, open a planned set of access points in drywall, and pull the new PEX lines while your existing pipes keep serving the house. Only when the new system is complete and pressure-tested do we make the changeover — that's the part-of-one-day window where the water is off. Then the access openings get patched, textured, and left ready for paint.

A typical Henderson single-family home takes two to four days end to end. Larger two-story homes with long fixture runs sit at the top of that range; compact single-stories at the bottom. You'll know the schedule before we start, because it's part of the flat quote.

What "One Flat Quote" Includes

• All new PEX hot and cold supply lines, and new quarter-turn shutoff valves at fixtures we repipe
• Labor, materials, changeover, and pressure testing
• Drywall access patching and texture
• Daily cleanup and floor/furniture protection

The number doesn't move mid-job. If we find something unexpected behind a wall, that's our problem to solve inside the price — not a change order.

Planning Details Henderson Homeowners Ask About

The day-by-day sequence above is the same in every house. These are the details that change from one Henderson home to the next, and they're what we walk through at the free assessment.

Routing New Lines in a Slab-on-Grade Home

Most Henderson homes sit on concrete slabs, with original supply lines buried beneath them or run through walls. Rather than breaking up a slab floor, a repipe typically routes the new PEX overhead and drops it down interior walls to each fixture. That's why the access openings land where they do, and why the work stays out of your flooring.

Two-Story Plans and Long Fixture Runs

An upstairs laundry, a far-end primary bath, or a second water heater adds linear feet and access points. Those homes sit at the four-day end of the schedule; a compact single-story often finishes sooner. Either way the timeline is set at the assessment and written into the flat quote, so you can plan work-from-home days and guests around it.

Water Heater, Hose Bibs, and Fixture Shutoffs

A whole-home repipe ends at every point that uses water, not just the sinks. The new lines connect to the water heater, the laundry box, toilets, tubs, and outdoor hose connections, and each repiped fixture gets a new quarter-turn shutoff valve. The next time a faucet needs work, you shut off one fixture instead of the whole house.

Getting the House Ready Before Day One

The crew covers floors and furniture, but a little prep speeds things up: clear the cabinets under sinks, pull stored items out of closets that back onto plumbing walls, and set fragile décor aside. Pets do best in a closed room or off-site during the changeover. We'll point out the specific spots during the walkthrough before work starts.

Repiping Before a Sale or Right After Buying

Inspection reports in Henderson regularly flag gray polybutylene lines and copper with a history of pinhole repairs. Sellers repipe to take the item off the table; new owners repipe before they move furniture in and finish walls. If recurring copper leaks are what's driving the decision, the assessment confirms whether the whole system is involved.

Which Neighborhoods Tend to Need It

The age and material of a home's plumbing track closely with when its neighborhood was built. Our Henderson neighborhood guide lays out what we usually find from the Water Street townsite to Inspirada, and the repipe FAQ covers water shutoff windows and drywall patching in more detail.